Hardware Setup and Installation of 123.hp.com/envy 5546 printer

HP Envy 5546 printer is used for wireless printing. It can be used anywhere and everywhere to print the documents or photos. It is a affordable printer which is used to produce borderless printing with lab quality photos. With this printer, you can print bold and sharp documents. This printer is also able to print the documents wirelessly from network connected computer, laptop, smartphones and tablet. You can also save the paper with this printer as it has the option of automatic two sided printing. It also decreases the consumption of power. The compact size of 123.hp.com/envy 5546 printer also saves a lot of space. It also supports mobile printing with which you can print the documents from anywhere. It allows you to print the documents directly without a wireless network.

There are some steps that need to follow before starting the printing from your device. You have to setup the hardware and install the setup of your printer. Firstly, you have to take out the printer from the box and remove all the plastic material and packing all around the printer. After that connect one end of the power cord to rear end of the printer. Connect another end of the power cord to the power source. Turn on your printer by pressing power button present at the left side of the printer.

During the initialization process of HP printer, it may create noise. You can set the preferred language, date, country and time by using upward or downward arrows. The printer screen prompt you to install the ink cartridges. After that, open the ink cartridge access door and install tri-colour cartridge on back cover of the cartridge. To remove the tape, use orange pull tape which covers ink nozzles and electrical contact.

In the next step, remove lock cover of tri-colour cartridge and move it towards the slot. Ensure that you place cartridge correctly in lock lever. Close lock lever. Do the same process in order to place the black cartridge. Close the ink cartridge access door. Your printer will find the installation of HP cartridge automatically. After that a confirmation message is displayed on the screen in the control panel of the printer. Press Ok to continue further. Load the paper into the input paper tray after installing the ink cartridge which is designed on different size of papers. The printer will print an alignment paper automatically. Place the paper downward which face the scanner glass after receiving the printed page under HP driver and software. At last, cover the scanner lid after placing the paper into it to continue the scanning process. You can set the printer to a wireless connection by using the software which comes along with printer.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s